Drivers Etek Labs Port Devices



The latest version Silicon labs driver cp210x USB to UART Bridge driver does not work (will not install) on Windows 10 build 1903. The older driver (6.7.4.261) installs and works fine on the same machine running Windows 10 build 1803. I am trying to communicate with an ESP32 development board that has Sil Labs USB to Serial chip. Click “Device Manager” on the window that appears. On the Device Manager screen, double-click “Port (COM & LPT)”. 「 Silicon Labs Dual CP210x USB to UART Bridge: Enhanced COM Port (COM5)」 「 Silicon Labs Dual CP210x USB to UART Bridge: Standard COM Port (COM6)」.

  1. Drivers Etek Labs Port Devices Download
  2. Drivers Etek Labs Port Devices Lucie
  3. Drivers Etek Labs Port Devices Inc
  4. Drivers Etek Labs Port Devices Gigabit
Hardware - Install a Printer as a Local Port Device
Applies to: Windows 10, 8.1, 8, 7, Vista and XP
Drivers Etek Labs Port Devices
LabsHow do I install a printer as a Local Port device?

Drivers Etek Labs Port Devices Download


Solution:Devices
Use the instructions below to install the printer using a Local Port on the given operating system.
NOTE: These instructions assume the following:
Lucie
  • The printer is already shared from the computer that is hosting it. See How to Share a Printer- FAQ 38545 for more information.
  • That you have downloaded the proper drivers for the printer model you are installing.
  • That you are able to access the shared resources on that computer without being prompted for login credentials. If you cannot access the hosting PC without providing credentials, correct that issue before proceeding.
  • You have ensured the printer is shared and security is set to Everyone with Full Control.
If these steps have not been performed, please do so before attempting installation of a Local Port device. Failure to do so will result in failure errors when trying to create the port.
Click the + or the header to expand the section.

To install a printer locally on Windows 10, follow these steps:

  1. Right-click on the Windows logo in the bottom left of the screen. Select Search.
  2. Search for Control Panel. Select it from the search results.
  3. Find Devices and Printers in the Control Panel and open it.
  4. Click Add a Printer (on the top).
  5. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.

  6. Click Add a local printer or network printer with manual settings. Click Next.

  7. Click Create a new port. Select Local Port for Type of port.
  8. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
  9. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
  10. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows 8.1, follow these steps:

Drivers Etek Labs Port Devices
  1. Right-click on the Windows logo in the bottom left of the screen. Select Control Panel.
  2. Find Devices and Printers in the Control Panel and open it.
  3. Click Add a Printer (on the top).
  4. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
  5. Click Add a local printer or network printer with manual settings. Click Next.
  6. Click Create a new port. Select Local Port for Type of port.
  7. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
  8. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
  9. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows 8, follow these steps:

Drivers Etek Labs Port Devices Lucie

  1. Move your mouse to the lower-right to bring up the Charms bar, or press Windows key + C.
  2. Click on the Settings gear, then click Control Panel.
  3. In Control Panel, open Devices and Printers.
  4. Click Add a Printer (on the top).
  5. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
  6. Click Add a local printer or network printer with manual settings. Click Next.
  7. Click Create a new port. Select Local Port for Type of port.
  8. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
  9. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
  10. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

Drivers Etek Labs Port Devices Inc

To install a printer locally on Windows Vista and 7, follow these steps:

  1. Click Start | Devices and Printers.
  2. Click Add a Printer (on the top).
  3. Select Add a local printer.
  4. Select Create a new port. Select Local Port for the Port Type. Click Next.
  5. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK
  6. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
  7. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on a Windows XP-based computer, follow these steps:

  1. Go to Start |Control Panel |Printers and Other Hardware |Printers and Faxes.
  2. Double-click Add Printer to start the Add Printer Wizard. Click Next.
  3. Click Local printer. Clear the Automatically detect and install check box. Click Next.
  4. Click Create a new port. Click Local Port in the Port type section.
  5. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer: serverprinter.
  6. Click Next. Select the driver for your printer. If the driver is not listed, click Have Disk and browse to the location where you earlier extracted the drivers.
  7. Click Next, and then follow the instructions to finish the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

Drivers Etek Labs Port Devices Gigabit


Printed copies of this document are considered uncontrolled.
21672.Rev006 01.06.2021